Hp pavilion dv5-1170ei driver download

Computer freezes during the update of the BIOS

I have a hp pavilion dv5-1170ei and he had problems with the audio and the quick launch buttons after the upgrade to Windows 7. I decided to update the bios, because it was the only thing that I had not updated. Now, the computer is frozen with the update of the BIOS still running. I had the same problem with a dv5-1199ei and it worked fine after upgrading the BIOS. Either way, I upgraded from Vista Home premium to Win 7 Ultimate.

I don't know what to do.

Help!

I had the same problem of problem freezing the computer during BIOS update. I have a HP Pavilion DV5 laptop 1126ee. When I update the bios, I don't notice her latest version of the bios installed on my system. I tried several ways of the various positions in the HP support forum. But I couldn't boot my system. Finally I could start my system. find the steps I did: -.

I first create a crisis recovery HP 2 GB USB key

downloaded Bios F.16A file on the HP (for HP DV5 1126ee) support site

Then copied 3602F16. FD AND 3603F16. FD TO USB

and renamed its copy to 3602.BIN, 3603.BIN, 3602.WPH, 3603.WPH, 3602F16. BIN, 3603F16. BIN. All files in the same USB BIOS.

Then I unplugged the power and removed the battery.

Insert USB drive into the system, Hold Windows + B button, plugged in the power and turned on the laptop. When the USB key is charge flashing I took out the key combination. Then I heard a unique single beep (before checking time is 2 + 1 beep and continuous beep). After the shutdown of the system 2-3 minutes automatically. Then I removed the USB and turn on the system. Now my system works perfectly.

With our thanks,

-Noushad

automatic updates in the extensions for firefox should be offshore or by default?

There should be automatic updates in the extensions for Firefox to on, off or default?

Thank you

You want to always updated either active, then leave them on

Username and password required for the update of the BIOS download?

Hi guys,.

Hoping someone could help.

Yesterday, I received my Mini of click on Satellite and I currently support after discovering there is a certain drivers are installed before you can actually use the thing.

While the laptop is in charge, I try to download the update of the BIOS on my laptop, so I can transfer it to my laptop once it is fully charged... I did have problems downloading tastes of the driver wifi for example but when I try to download the BIOS update opens a new and tab where Toshiba ask me a username and password? I tried to enter my username and password I used to register on this site and I also tried using another computer to download it, but without success. It is worth noting that I could partially download the file last night but then it failed to half way through download?

Any suggestions?

Thank you very much

Liam

Hi all

I am eager to read an answer that helps on these issues...

The update of the BIOS on Satellite Pro U400?

I have a Toshiba Satellite Pro U400 (PSU41E) running Windows 7 x 64 and I try to update the BIOS to version 4.70 to 4.00.

Whenever I try to do it from Windows using WinPhlash which comes with the download on the Toshiba site it seems to freeze when you try to Flash the new BIOS.
I connected as the local administrator, tried to use other programs flash and even tried to do from a USB flash drive with no luck.

Can someone please help me and explain how do I update the BIOS?

Hello

> tried to use other flash programs
Never use other flash programs! In the worst case, you could damage the ROM module and then it must be replaced. Use only the program flash Toshiba that is tested and designed for laptop and the version of the BIOS.

The update of the BIOS program is also designed for Windows, it s a Windows Update program.

Satellite Pro U400 wasn t comes with Windows 7 so I guess you did your own installation. Value added package is required for the update of the BIOS program and can be downloaded on the European driver of Toshiba download page where is your laptop model:
http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

Tecra M10 - update of the BIOS says "this computer is not supported.

Recently refurbished a M10 - 10I to reinstall the operating system. WinXP install at all so I try to update the BIOS as it seems quite old (V1.5). Most recent version (and is available) for this machine seems to be V3.0. Download and try to run the file "P0065V300" and get the message:

Package for the TOSHIBA BIOS ver.3.3.0
This computer is not supported

What can I do? Its supposed to be for this model!

Also, prefer a version of boot drive, but hey, I can use a version of Windows, assuming that it runs on Win7.

Hello

Tecra M10 - 10I belongs to the series of PTMB1E and according to the page of the Toshiba UE driver, BIOS v3.00 - WIN is the latest BIOS version which is available for this model.

The BIOS update requires a few additional tools Toshiba as VAP (additional package for Win 7)

If this driver isn't installed, the update of the BIOS would not work.

Need to check the update of the BIOS Portege R830 without Intel TXT

Hello Forum,

I have exactly the same problem as described here 2 years ago:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=65519

I need to update my BIOS, but I can't because the update of the BIOS told me that the Intel TXT is enabled.
Unfortunately I can not disable it in my bios. Its just not selectable. The 'cursor' jumping just above him.
I can only 'hide' which does not help.
I have the same thing for the VT - x and VT - d setting in the BIOS. Is not selectable or editable as well.

TPM is not active if...
I installed after infineon and he tells me I need to enable the TPM in the bios to use. :-(

I have a very old Bios Version 3.1 and I read in the changelog that there are a lot of TPM in v 3.4 and 3.5 related changes...

In any case...
A P007Dv360A_EC77V140.zip file has been transferred to 2shared.com who fixed it at the time, a user named Paolo30.
Unfortunately, that this file has been deleted on 2shared.com

can someone please provide this file (or an update of the bios later) which resolves this issue?
Thanks in advance.

Portégé R830 - 10 p belongs to the series of PT321 if you need the BIOS for Portege R830 PT321

You can download older versions of pages driver Toshiba BIOS.
For example: http://www.toshiba-asia.com/sg/support/drivers

On this page of Toshiba Asia I could find all the BIOS for this Portege model.

Satellite R830-143 - update of the BIOS does not support this operating system

Hello

I received a notification via Tempro that he did not have a BIOS upgrade. I downloaded the ZIP file (bios - 20120209125153.zip), extract the package (BIOS360_EC140_WIN.exe) and ran it according to the instructions.

The package runs, give the progress bar "extract files...". ", then displays a dialogue entitled"TOSHIBA BIOS package Ver.4.1.2"that says:"this package BIOS does not support this operating system."

I am running Windows 7 Home Premium 64 - bit on a Satellite 830R-143 with the short part No. PT32LE

Does anyone know what is the problem?

Thanks in advance for your help...

Hello

You have problems with the laptop?
If not then why you want to do the BIOS? Just because the new BIOS is released?
I would not change anything if my laptop is running correctly.

However, the update of the BIOS requires the VAP (value added package).
So remember that this PPV is installed correctly. If this isn't the case, so far.

How I restore the update to the BIOS on Satellite U400-157?

I recently updated a Tempro alert for update of the BIOS for the notebook. Now, I noticed that the screen blanks a few times at PC startup. It was't there before. How do I roll back the update of the BIOS to a previous one.

I don't get to see the BIOS updated screen other cases other than the time I did the BIOS update.

Hello

To be honest I don't understand exactly what your problem is.
You said:. Now, I noticed that the screen blanks a few times at PC startup.
Does that mean exactly? Is your black screen until Windows has started?

To be honest, I put t think the BIOS update would be the reason for which go into the BIOS (press F2) and set the default BIOS settings (F9) and save the changes (F10).

If you want to recover the BIOS version earlier, then you will need Flash module ROM BIOS using a basic BIOS version BACK. You will find on the European driver Toshiba page only the win versions

Portege Z930 - 12 H - update of the BIOS and McAfee Endpoint Encryption?

The update to the latest BIOS (Ver.6.70) for my laptop Portege Z930 12 H comes with the warning:

«If you use the BitLocker Windows Drive encryption, please temporarily suspend (or turn off) before BitLocker Drive Encryption updated BIOS.»

The same caveat applies to McAfee Endpoint Encryption, which is used on my laptop and I can * not * pause or stop? Or can I apply the upgrade of the BIOS safely?

Thank you.

As much I know Bitlocker isn't related to Antivirus from McAfee software and two security tools are not connected to each other. BitLocker is a tool for Microsoft Windows and McAfee is a 3rd party software preinstallation on the device.

I found a nice how doc on the update of the BIOS.

[How to upgrade the BIOS on Toshiba laptops | http://aps2.toshiba-tro.de/kb0/HTD9502M10000R01.htm]

Satellite A110-180 - update of the Bios for Windows 7 and Linux

Hello

I want to change the following settings in my bios on my laptop satellite A110-180
* AHCI for SATA
Disable the IDE

But none of these options.
So I thought that maybe I should update my bios.
I found the download page, but there are 2 options: Windows Vista or NO vista, but I want to dual boot windows 7 and linux.

Which one should I download, or is there another option to change the settings?

Thank you!
Bart

Hello

Satellite A110 does not support these options (SATA AHCI).
The update of the BIOS will not help you!

Linux is not supported and therefore, you will not find any special BIOS for Linux OS!

The two BIOS updates are for Win Vista or OS independent.
Therefore, if you use other than Vista OS then you should throw the update of the independent BIOS to the BONE!

But as mentioned above; both options will not appear after the BIOS update!

Satellite Pro C660 bricked by update of the BIOS that failed

My sister asked me to update his laptop (Toshiba Satellite Pro C660-16N; The part number PSC0ME-01S00SEN) of Windows 7 Home Premium (64 bit) of Windows 8 (64-bit).
So I did.

Then I went UK from Toshiba Web site to check if there are any drivers I had to install for Windows 8. The only one was an update of the BIOS (for BIOS v1.70). I don't know what was the previous BIOS version number.

So I run the update application in Windows 8. Phoenix WinPhlash Technologies starts and then in the middle of the update, everything freezes.

The trackpad would not move the cursor or anything like that. I had no choice but to disconnect the phone from the wall and remove the battery. The laptop is not under warranty.

Of course, now it won't turn. It will beep once when I press the power button, but the system does not light. A few minutes later, it looks like one long beep and two short beeps. It then keeps repeating this sequence every two minutes "one long beep, 2 short beeps".

I google and read the site after the blog after the post on the forum, but nothing works. Links to the software offered on these forums/blogs/Web sites in french are usually dead, so I can't try what they suggest.

The most common solution is the Phoenix crisis recovery tool. I managed to download v1.0.0.4 which is supposed to allow me to make a bootable USB key. The version of this tool that I downloaded is supposed to be for a Lenovo ThinkPad X 200. I have the correct BIOS.rom to C660 Pro Satellite (I renamed BIOS.wph and copied to the appropriate folder).

I followed all the instructions, but it doesn't seem to work. Some sites say if it happens, I have the wrong version of phlash16.exe. Some other sites say that HP Boot Disk USB Utility should be used, but I don't know how to use it.

What I really need, is a definitive step by step foolproof guide to know what to do, with links to the files/tools to use for this model of laptop. I will follow this blindly (which I don't really understand what makes each step, I just do it with no understanding,) so if anyone can help me with this, please write a guide like an idiot!

If anyone can help me with this, I appreciate it. I'm really in a difficult situation - I can't really afford to pay a Toshiba ASP to fix it, and I can't afford a new laptop certainly. But I also couldn't bring myself to tell my sister, ' it's broken, deal!

Thanks in advance.

Take a look at this thread:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59637

Perhaps the last comment by the user * gansell1980 * could help you.
Otherwise, you need help from the Toshiba authorized service if you reflash the BIOS ROM module provider

Satellite Pro M70-113: is the update of the Bios as of 03/06/07 supports slic tables

Hello
Maybe someone knows if the update of the bios for toshiba satellite pro m70-113, dated 03/06/07 supports slic tables or not?
For vista oem installation dvd?

Thank you...

You will not be able to find info accurate on the BIOS and what exactly is supported or not. If you just want to install Vista on your M70 I can just say that I installed Vista Ultimate on my Satellite M70-159 (PSM71E) without any problem.

The update of the BIOS for Satellite Pro M70 does support TPM?

Hello

There was an update of the bios that is specially designed for Vista... = bios-vista - 510win.zip on the Toshiba site...

Although my Satellite Pro M70-113 did not support the default TPM module (BIOS verson 1.1, I always have this), is it possible that this update includes the TPM secure to enable bitlocker on vista?

Can someone check and confirm please... :)

And secondly, is configuration BIOS update for Windows utility saves the current state of the BIOS in some external as backup media, while if it happens with the process of update... the previous version can be restored in return?

And a BIOS may be downgraded?

Thank you.

Hello

(1.) I m not 100% sure but I think the new BIOS for the M70 does not support the TPM secure. I read somewhere that all BIOS versions that support TPM on Toshiba laptops cannot be updated by a common user, but the user must contact the authorized Toshiba service provider for these updates.
That's why I think that Toshiba would not any BIOPS version by download issue if this BIOS would support the TPM.

2.) now something about the second question:
The new BIOS version replaces the old BIOS and BIOS States and to my knowledge it of not possible to save the settings for a backup more later.
Generally, you must be careful with any update of the BIOS. Bad BIOS or bad update procedure may damage the jury!

Tecra A8-185 - the update of the BIOS under Windows 7?

Hi again,

I have a question how update of the BIOS under Windows 7 ultimate x 64. I downloaded the latest version of the BIOS for my laptop (Toshiba Tecra A8-185 PTA83E). After having unpacked there is only the .exe file.

When I try to run this file, he said, that my OS is not supported. When I run it in compatibility mode (with Vista or XP), it starts the upgrade, but gives me an error: "the BIOS upgrade is failure (8). BIOS is not able on this configuration. "What should I do? I really need a new BIOS.

Can I run it at the start of the USB key, or whatever?

Hi offi55

Why do you need a new BIOS? You may notice some problems with the laptop or why are you trying to update?

However, I think that the update should only be done on the pre-installed Windows version (XP or Vista). I guess that this update n t tested and designed to update Windows 7 so I think that would be the reason why you can t.

So to install Windows from the Toshiba Recovery disk and try to update again. It should work.