Plex Websocket Browser Plugin x32 download

NameDescriptionCVE-2020-9903A logic issue was addressed with improved restrictions. This issue is fixed in iOS 13.6 and iPadOS 13.6, Safari 13.1.2. A malicious attacker may cause Safari to suggest a password for the wrong domain. CVE-2020-9758An issue was discovered in chat.php in LiveZilla Live Chat 8.0.1.3 (Helpdesk). A blind JavaScript injection lies in the name parameter. Triggering this can fetch the username and passwords of the helpdesk employees in the URI. This leads to a privilege escalation, from unauthenticated to user-level access, leading to full account takeover. The attack fetches multiple credentials because they are stored in the database (stored XSS). This affects the mobile/chat URI via the lgn and psswrd parameters. CVE-2020-9529Firmware developed by Shenzhen Hichip Vision Technology (V6 through V20), as used by many different vendors in millions of Internet of Things devices, suffers from a privilege escalation vulnerability that allows attackers on the local network to reset the device's administrator password. This affects products marketed under the following brand names: Accfly, Alptop, Anlink, Besdersec, BOAVISION, COOAU, CPVAN, Ctronics, D3D Security, Dericam, Elex System, Elite Security, ENSTER, ePGes, Escam, FLOUREON, GENBOLT, Hongjingtian (HJT), ICAMI, Iegeek, Jecurity, Jennov, KKMoon, LEFTEK, Loosafe, Luowice, Nesuniq, Nettoly, ProElite, QZT, Royallite, SDETER, SV3C, SY2L, Tenvis, ThinkValue, TOMLOV, TPTEK, WGCC, and ZILINK. CVE-2020-9487In Apache NiFi 1.0.0 to 1.11.4, the NiFi download token (one-time password) mechanism used a fixed cache size and did not authenticate a request to create a download token, only when attempting to use the token to access the content. An unauthenticated user could repeatedly request download tokens, preventing legitimate users from requesting download tokens. CVE-2020-9477An issue was discovered on HUMAX HGA12R-02 BRGCAA 1.1.53 devices. A vulnerability in the authentication functionality in the web-based interface could allow an unauthenticated remote attacker to capture packets at the time of authentication and gain access to the cleartext password. An attacker could use this access to create a new user account or control the device. CVE-2020-9476ARRIS TG1692A devices allow remote attackers to discover the administrator login name and password by reading the /login page and performing base64 decoding. CVE-2020-9404In PACTware before 4.1 SP6 and 5.x before 5.0.5.31, passwords are stored in an insecure manner, and may be modified by an attacker with no knowledge of the current passwords. CVE-2020-9403In PACTware before 4.1 SP6 and 5.x before 5.0.5.31, passwords are stored in a recoverable format, and may be retrieved by any user with access to the PACTware workstation. CVE-2020-9384** DISPUTED ** An Insecure Direct Object Reference (IDOR) vulnerability in the Change Password feature of Subex ROC Partner Settlement 10.5 allows remote authenticated users to achieve account takeover via manipulation of POST parameters. NOTE: This vulnerability may only affect a testing version of the application. CVE-2020-9349The CACAGOO Cloud Storage Intelligent Camera TV-288ZD-2MP with firmware 3.4.2.0919 allows access to the RTSP service without a password. CVE-2020-9347** DISPUTED ** Zoho ManageEngine Password Manager Pro through 10.x has a CSV Excel Macro Injection vulnerability via a crafted name that is mishandled by the Export Passwords feature. NOTE: the vendor disputes the significance of this report because they expect CSV risk mitigation to be provided by an external application, and do not plan to add CSV constraints to their own products. CVE-2020-9346Zoho ManageEngine Password Manager Pro 10.4 and prior has no protection against Cross-site Request Forgery (CSRF) attacks, as demonstrated by changing a user's role. CVE-2020-9337In GolfBuddy Course Manager 1.1, passwords are sent (with base64 encoding) via a GET request. CVE-2020-9294An improper authentication vulnerability in FortiMail 5.4.10, 6.0.7, 6.2.2 and earlier and FortiVoiceEntreprise 6.0.0 and 6.0.1 may allow a remote unauthenticated attacker to access the system as a legitimate user by requesting a password change via the user interface. CVE-2020-9289Use of a hard-coded cryptographic key to encrypt password data in CLI configuration in FortiManager 6.2.3 and below, FortiAnalyzer 6.2.3 and below may allow an attacker with access to the CLI configuration or the CLI backup file to decrypt the sensitive data, via knowledge of the hard-coded key. CVE-2020-9277An issue was discovered on D-Link DSL-2640B B2 EU_4.01B devices. Authentication can be bypassed when accessing cgi modules. This allows one to perform administrative tasks (e.g., modify the admin password) with no authentication. CVE-2020-9270ICE Hrm 26.2.0 is vulnerable to CSRF that leads to password reset via service.php. CVE-2020-9266SOPlanning 1.45 is vulnerable to a CSRF attack that allows for arbitrary changing of the admin password via process/xajax_server.php. CVE-2020-9028Symmetricom SyncServer S100 2.90.70.3, S200 1.30, S250 1.25, S300 2.65.0, and S350 2.80.1 devices allow stored XSS via the newUserName parameter on the "User Creation, Deletion and Password Maintenance" screen (when creating a new user). CVE-2020-9023Iteris Vantage Velocity Field Unit 2.3.1 and 2.4.2 devices have two users that are not documented and are configured with weak passwords (User bluetooth, password bluetooth; User eclipse, password eclipse). Also, bluetooth is the root password. CVE-2020-8994An issue was discovered on XIAOMI AI speaker MDZ-25-DT 1.34.36, and 1.40.14. Attackers can get root shell by accessing the UART interface and then they can read Wi-Fi SSID or password, read the dialogue text files between users and XIAOMI AI speaker, use Text-To-Speech tools pretend XIAOMI speakers' voice achieve social engineering attacks, eavesdrop on users and record what XIAOMI AI speaker hears, delete the entire XIAOMI AI speaker system, modify system files, stop voice assistant service, start the XIAOMI AI speaker&#8217;s SSH service as a backdoor CVE-2020-8956Pulse Secure Desktop Client 9.0Rx before 9.0R5 and 9.1Rx before 9.1R4 on Windows reveals users' passwords if Save Settings is enabled. CVE-2020-8868This vulnerability allows remote attackers to execute arbitrary code on affected installations of Quest Foglight Evolve 9.0.0. Authentication is not required to exploit this vulnerability. The specific flaw exists within the __service__ user account. The product contains a hard-coded password for this account. An attacker can leverage this vulnerability to execute arbitrary code in the context of SYSTEM. Was ZDI-CAN-9553. CVE-2020-8864This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of D-Link DIR-867, DIR-878, and DIR-882 routers with firmware 1.10B04. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of HNAP login requests. The issue results from the lack of proper handling of empty passwords. An attacker can leverage this vulnerability to execute arbitrary code on the router. Was ZDI-CAN-9471. CVE-2020-8862This vulnerability allows network-adjacent attackers to bypass authentication on affected installations of D-Link DAP-2610 Firmware v2.01RC067 routers. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of passwords. The issue results from the lack of proper password checking. An attacker can leverage this vulnerability to execute arbitrary code in the context of root. Was ZDI-CAN-10082. CVE-2020-8828As of v1.5.0, the default admin password is set to the argocd-server pod name. For insiders with access to the cluster or logs, this issue could be abused for privilege escalation, as Argo has privileged roles. A malicious insider is the most realistic threat, but pod names are not meant to be kept secret and could wind up just about anywhere. CVE-2020-8791The OKLOK (3.1.1) mobile companion app for Fingerprint Bluetooth Padlock FB50 (2.3) allows remote attackers to submit API requests using authenticated but unauthorized tokens, resulting in IDOR issues. A remote attacker can use their own token to make unauthorized API requests on behalf of arbitrary user IDs. Valid and current user IDs are trivial to guess because of the user ID assignment convention used by the app. A remote attacker could harvest email addresses, unsalted MD5 password hashes, owner-assigned lock names, and owner-assigned fingerprint names for any range of arbitrary user IDs. CVE-2020-8790The OKLOK (3.1.1) mobile companion app for Fingerprint Bluetooth Padlock FB50 (2.3) has weak password requirements combined with improper restriction of excessive authentication attempts, which could allow a remote attacker to discover user credentials and obtain access via a brute force attack. CVE-2020-8632In cloud-init through 19.4, rand_user_password in cloudinit/config/cc_set_passwords.py has a small default pwlen value, which makes it easier for attackers to guess passwords. CVE-2020-8631cloud-init through 19.4 relies on Mersenne Twister for a random password, which makes it easier for attackers to predict passwords, because rand_str in cloudinit/util.py calls the random.choice function. CVE-2020-8592eG Manager 7.1.2 allows SQL Injection via the user parameter to com.eg.LoginHelperServlet (aka the Forgot Password feature). CVE-2020-8573The NetApp HCI H610C, H615C and H610S Baseboard Management Controllers (BMC) are shipped with a documented default account and password that should be changed during the initial node setup. During upgrades to Element 11.8 and 12.0 or the Compute Firmware Bundle 12.2.92 the BMC account password on the H610C, H615C and H610S platforms is reset to the default documented value which could allow remote attackers to cause a Denial of Service (DoS). CVE-2020-8553The Kubernetes ingress-nginx component prior to version 0.28.0 allows a user with the ability to create namespaces and to read and create ingress objects to overwrite the password file of another ingress which uses nginx.ingress.kubernetes.io/auth-type: basic and which has a hyphenated namespace or secret name. CVE-2020-8547phpList 3.5.0 allows type juggling for admin login bypass because == is used instead of === for password hashes, which mishandles hashes that begin with 0e followed by exclusively numerical characters. CVE-2020-8510An issue was discovered in phpABook 0.9 Intermediate. On the login page, if one sets a userInfo cookie with the value of admin+1+en (user+perms+lang), one can login as any user without a password. CVE-2020-8493A stored XSS vulnerability in Kronos Web Time and Attendance (webTA) affects 3.8.x and later 3.x versions before 4.0 via multiple input fields (Login Message, Banner Message, and Password Instructions) of the com.threeis.webta.H261configMenu servlet via an authenticated administrator. CVE-2020-8469Trend Micro Password Manager for Windows version 5.0 is affected by a DLL hijacking vulnerability would could potentially allow an attacker privleged escalation. CVE-2020-8434Jenzabar JICS (aka Internet Campus Solution) before 9.0.1 Patch 3, 9.1 before 9.1.2 Patch 2, and 9.2 before 9.2.2 Patch 8 has session cookies that are a deterministic function of the username. There is a hard-coded password to supply a PBKDF feeding into AES to encrypt a username and base64 encode it to a client-side cookie for persistent session authentication. By knowing the key and algorithm, an attacker can select any username, encrypt it, base64 encode it, and save it in their browser with the correct JICSLoginCookie cookie format to impersonate any real user in the JICS database without the need for authenticating (or verifying with MFA if implemented). CVE-2020-8422An authorization issue was discovered in the Credential Manager feature in Zoho ManageEngine Remote Access Plus before 10.0.450. A user with the Guest role can extract the collection of all defined credentials of remote machines: the credential name, credential type, user name, domain/workgroup name, and description (but not the password). CVE-2020-8228A missing rate limit in the Preferred Providers app 1.7.0 allowed an attacker to set the password an uncontrolled amount of times. CVE-2020-8219An insufficient permission check vulnerability exists in Pulse Connect Secure <9.1R8 that allows an attacker to change the password of a full administrator. CVE-2020-8202Improper check of inputs in Nextcloud Preferred Providers app v1.6.0 allowed to perform a denial of service attack when using a very long password. CVE-2020-8183A logic error in Nextcloud Server 19.0.0 caused a plaintext storage of the share password when it was given on the initial create API call. CVE-2020-8142A security restriction bypass vulnerability has been discovered in Revive Adserver version < 5.0.5 by HackerOne user hoangn144. Revive Adserver, like many other applications, requires the logged in user to type the current password in order to change the e-mail address or the password. It was however possible for anyone with access to a Revive Adserver admin user interface to bypass such check and change e-email address or password of the currently logged in user by altering the form payload.The attack requires physical access to the user interface of a logged in user. If the POST payload was altered by turning the &#8220;pwold&#8221; parameter into an array, Revive Adserver would fetch and authorise the operation even if no password was provided. CVE-2020-8088panel_login.php in UseBB 1.0.12 allows type juggling for login bypass because != is used instead of !== for password hashes, which mishandles hashes that begin with 0e followed by exclusively numerical characters. CVE-2020-8001The Intellian Aptus application 1.0.2 for Android has a hardcoded password of intellian for the masteruser FTP account. CVE-2020-8000Intellian Aptus Web 1.24 has a hardcoded password of 12345678 for the intellian account. CVE-2020-7998An arbitrary file upload vulnerability has been discovered in the Super File Explorer app 1.0.1 for iOS. The vulnerability is located in the developer path that is accessible and hidden next to the root path. By default, there is no password set for the FTP or Web UI service. CVE-2020-7991Adive Framework 2.0.8 has admin/config CSRF to change the Administrator password. CVE-2020-7988An issue was discovered in tools/pass-change/result.php in phpIPAM 1.4. CSRF can be used to change the password of any user/admin, to escalate privileges, and to gain access to more data and functionality. This issue exists due to the lack of a requirement to provide the old password, and the lack of security tokens. CVE-2020-7962An issue was discovered in One Identity Password Manager 5.8. An attacker could enumerate valid answers for a user. It is possible for an attacker to detect a valid answer based on the HTTP response content, and reuse this answer later for a password reset on a chosen password. The enumeration is possible because, within the HTTP response content, WRONG ID is only returned when the answer is incorrect. CVE-2020-7954An issue was discovered in OpServices OpMon 9.3.2. Starting from the apache user account, it is possible to perform privilege escalation through the lack of correct configuration in the server's sudoers file, which by default allows the execution of programs (e.g. nmap) without the need for a password with sudo. CVE-2020-7940Missing password strength checks on some forms in Plone 4.3 through 5.2.0 allow users to set weak passwords, leading to easier cracking. CVE-2020-7909In JetBrains TeamCity before 2019.1.5, some server-stored passwords could be shown via the web UI. CVE-2020-7759The package pimcore/pimcore from 6.7.2 and before 6.8.3 are vulnerable to SQL Injection in data classification functionality in ClassificationstoreController. This can be exploited by sending a specifically-crafted input in the relationIds parameter as demonstrated by the following request: http://vulnerable.pimcore.example/admin/classificationstore/relations?relationIds=[{"keyId"%3a"''","groupId"%3a"'asd'))+or+1%3d1+union+(select+1,2,3,4,5,6,name,8,password,'',11,12,'',14+from+users)+--+"}] CVE-2020-7591A vulnerability has been identified in SIPORT MP (All versions < 3.2.1). Vulnerable versions of the device could allow an authenticated attacker to impersonate other users of the system and perform (potentially administrative) actions on behalf of those users if the single sign-on feature ("Allow logon without password") is enabled. CVE-2020-7590A vulnerability has been identified in DCA Vantage Analyzer (All versions < V4.5 are affected by CVE-2020-7590. In addition, serial numbers < 40000 running software V4.4.0 are also affected by CVE-2020-15797). Affected devices use a hard-coded password to protect the onboard database. This could allow an attacker to read and or modify the onboard database. Successful exploitation requires direct physical access to the device. CVE-2020-7567A CWE-311: Missing Encryption of Sensitive Data vulnerability exists in Modicon M221 (all references, all versions) that could allow the attacker to find the password hash when the attacker has captured the traffic between EcoStruxure Machine - Basic software and Modicon M221 controller and broke the encryption keys. CVE-2020-7525Improper Restriction of Excessive Authentication Attempts vulnerability exists in all hardware versions of spaceLYnk and Wiser for KNX (formerly homeLYnk) which could allow an attacker to guess a password when brute force is used. CVE-2020-7519A CWE-521: Weak Password Requirements vulnerability exists in Easergy Builder (Version 1.4.7.2 and older) which could allow an attacker to compromise a user account. CVE-2020-7515A CWE-321: Use of hard-coded cryptographic key stored in cleartext vulnerability exists in Easergy Builder (Version 1.4.7.2 and older) which could allow an attacker to decrypt a password. CVE-2020-7511A CWE-327: Use of a Broken or Risky Cryptographic Algorithm vulnerability exists in Easergy T300 (Firmware version 1.5.2 and older) which could allow an attacker to acquire a password by brute force. CVE-2020-7492A CWE-521: Weak Password Requirements vulnerability exists in the GP-Pro EX V1.00 to V4.09.100 which could cause the discovery of the password when the user is entering the password because it is not masqueraded. CVE-2020-7484**VERSION NOT SUPPORTED WHEN ASSIGNED** A vulnerability with the former 'password' feature could allow a denial of service attack if the user is not following documented guidelines pertaining to dedicated TriStation connection and key-switch protection. This vulnerability was discovered and remediated in versions v4.9.1 and v4.10.1 on May 30, 2013. This feature is not present in version v4.9.1 and v4.10.1 through current. Therefore, the vulnerability is not present in these versions. CVE-2020-7483**VERSION NOT SUPPORTED WHEN ASSIGNED** A vulnerability could cause certain data to be visible on the network when the 'password' feature is enabled. This vulnerability was discovered in and remediated in versions v4.9.1 and v4.10.1 on May 30, 2013. The 'password' feature is an additional optional check performed by TS1131 that it is connected to a specific controller. This data is sent as clear text and is visible on the network. This feature is not present in TriStation 1131 versions v4.9.1 and v4.10.1 through current. Therefore, the vulnerability is not present in these versions. CVE-2020-7470Sonoff TH 10 and 16 devices with firmware 6.6.0.21 allows XSS via the Friendly Name 1 field (after a successful login with the Web Admin Password). CVE-2020-7450In FreeBSD 12.1-STABLE before r357213, 12.1-RELEASE before 12.1-RELEASE-p2, 12.0-RELEASE before 12.0-RELEASE-p13, 11.3-STABLE before r357214, and 11.3-RELEASE before 11.3-RELEASE-p6, URL handling in libfetch with URLs containing username and/or password components is vulnerable to a heap buffer overflow allowing program misbehavior or malicious code execution. CVE-2020-7378CRIXP OpenCRX version 4.30 and 5.0-20200717 and prior suffers from an unverified password change vulnerability. An attacker who is able to connect to the affected OpenCRX instance can change the password of any user, including admin-Standard, to any chosen value. This issue was resolved in version 5.0-20200904, released September 4, 2020. CVE-2020-7307Unprotected Storage of Credentials vulnerability in McAfee Data Loss Prevention (DLP) for Mac prior to 11.5.2 allows local users to gain access to the RiskDB username and password via unprotected log files containing plain text credentials. CVE-2020-7306Unprotected Storage of Credentials vulnerability in McAfee Data Loss Prevention (DLP) for Mac prior to 11.5.2 allows local users to gain access to the ADRMS username and password via unprotected log files containing plain text CVE-2020-7299Cleartext Storage of Sensitive Information in Memory vulnerability in Microsoft Windows client in McAfee True Key (TK) prior to 6.2.109.2 allows a local user logged in with administrative privileges to access to another user&#8217;s passwords on the same machine via triggering a process dump in specific situations. CVE-2020-7293Privilege Escalation vulnerability in McAfee Web Gateway (MWG) prior to 9.2.1 allows authenticated user interface user with low permissions to change the system's root password via improper access controls in the user interface. CVE-2020-7245Incorrect username validation in the registration process of CTFd v2.0.0 - v2.2.2 allows an attacker to take over an arbitrary account if the username is known and emails are enabled on the CTFd instance. To exploit the vulnerability, one must register with a username identical to the victim's username, but with white space inserted before and/or after the username. This will register the account with the same username as the victim. After initiating a password reset for the new account, CTFd will reset the victim's account password due to the username collision. CVE-2020-7244Comtech Stampede FX-1010 7.4.3 devices allow remote authenticated administrators to achieve remote code execution by navigating to the Poll Routes page and entering shell metacharacters in the Router IP Address field. (In some cases, authentication can be achieved with the comtech password for the comtech account.) CVE-2020-7243Comtech Stampede FX-1010 7.4.3 devices allow remote authenticated administrators to achieve remote code execution by navigating to the Fetch URL page and entering shell metacharacters in the URL field. (In some cases, authentication can be achieved with the comtech password for the comtech account.) CVE-2020-7242Comtech Stampede FX-1010 7.4.3 devices allow remote authenticated administrators to achieve remote code execution by navigating to the Diagnostics Trace Route page and entering shell metacharacters in the Target IP address field. (In some cases, authentication can be achieved with the comtech password for the comtech account.) CVE-2020-7233KMS Controls BAC-A1616BC BACnet devices have a cleartext password of snowman in the BACKDOOR_NAME variable in the BC_Logon.swf file. CVE-2020-7232Evoko Home devices 1.31 through 1.37 allow remote attackers to obtain sensitive information (such as usernames and password hashes) via a WebSocket request, as demonstrated by the sockjs/224/uf1psgff/websocket URI at a wss:// URL. CVE-2020-7215An issue was discovered in Gallagher Command Centre 7.x before 7.90.991(MR5), 8.00 before 8.00.1161(MR5), and 8.10 before 8.10.1134(MR4). External system configuration data (used for third party integrations such as DVR systems) were logged in the Command Centre event trail. Any authenticated operator with the 'view events' privilege could see the full configuration, including cleartext usernames and passwords, under the event details of a Modified DVR System event. CVE-2020-7196The HPE BlueData EPIC Software Platform version 4.0 and HPE Ezmeral Container Platform 5.0 use an insecure method of handling sensitive Kerberos passwords that is susceptible to unauthorized interception and/or retrieval. Specifically, they display the kdc_admin_password in the source file of the url "/bdswebui/assignusers/". CVE-2020-7030A sensitive information disclosure vulnerability was discovered in the web interface component of IP Office that may potentially allow a local user to gain unauthorized access to the component. Affected versions of IP Office include: 9.x, 10.0 through 10.1.0.7 and 11.0 though 11.0.4.3. CVE-2020-7010Elastic Cloud on Kubernetes (ECK) versions prior to 1.1.0 generate passwords using a weak random number generator. If an attacker is able to determine when the current Elastic Stack cluster was deployed they may be able to more easily brute force the Elasticsearch credentials generated by ECK. CVE-2020-6995In Moxa PT-7528 series firmware, Version 4.0 or lower, and PT-7828 series firmware, Version 3.9 or lower, the application utilizes weak password requirements, which may allow an attacker to gain unauthorized access. CVE-2020-6991In Moxa EDS-G516E Series firmware, Version 5.2 or lower, weak password requirements may allow an attacker to gain access using brute force. CVE-2020-6990Rockwell Automation MicroLogix 1400 Controllers Series B v21.001 and prior, Series A, all versions, MicroLogix 1100 Controller, all versions, RSLogix 500 Software v12.001 and prior, The cryptographic key utilized to help protect the account password is hard coded into the RSLogix 500 binary file. An attacker could identify cryptographic keys and use it for further cryptographic attacks that could ultimately lead to a remote attacker gaining unauthorized access to the controller. CVE-2020-6988Rockwell Automation MicroLogix 1400 Controllers Series B v21.001 and prior, Series A, all versions, MicroLogix 1100 Controller, all versions, RSLogix 500 Software v12.001 and prior, A remote, unauthenticated attacker can send a request from the RSLogix 500 software to the victim&#8217;s MicroLogix controller. The controller will then respond to the client with used password values to authenticate the user on the client-side. This method of authentication may allow an attacker to bypass authentication altogether, disclose sensitive information, or leak credentials. CVE-2020-6984Rockwell Automation MicroLogix 1400 Controllers Series B v21.001 and prior, Series A, all versions, MicroLogix 1100 Controller, all versions, RSLogix 500 Software v12.001 and prior, The cryptographic function utilized to protect the password in MicroLogix is discoverable. CVE-2020-6954An issue was discovered on Cayin SMP-PRO4 devices. A user can discover a saved password by viewing the URL after a Connection String Test. This password is shown in the webpass parameter of a media_folder.cgi?apply_mode=ping_server URI. CVE-2020-6949A privilege escalation issue was discovered in the postUser function in HashBrown CMS through 1.3.3. An editor user can change the password hash of an admin user's account, or otherwise reconfigure that account. CVE-2020-6948A remote code execution issue was discovered in HashBrown CMS through 1.3.3. Server/Entity/Deployer/GitDeployer.js has a Service.AppService.exec call that mishandles the URL, repository, username, and password. CVE-2020-6877A ZTE product is impacted by an information leak vulnerability. An attacker could use this vulnerability to obtain the authentication password of the handheld terminal and access the device illegally for operation. This affects: ZXA10 eODN V2.3P2T1 CVE-2020-6874A ZTE product is impacted by the cryptographic issues vulnerability. The encryption algorithm is not properly used, so remote attackers could use this vulnerability for account credential enumeration attack or brute-force attack for password guessing. This affects: ZXIPTV, ZXIPTV-WEB-PV5.09.08.04. CVE-2020-6870The version V12.17.20T115 of ZTE U31R20 product is impacted by a design error vulnerability. An attacker could exploit the vulnerability to log in to the FTP server to tamper with the password, and illegally download, modify, upload, or delete files, causing improper operation of the network management system and equipment. This affects: NetNumenU31R20 V12.17.20T115 CVE-2020-6864ZTE E8820V3 router product is impacted by an information leak vulnerability. Attackers could use this vulnerability to to gain wireless passwords. After obtaining the wireless password, the attacker could collect information and attack the router. CVE-2020-6857CarbonFTP v1.4 uses insecure proprietary password encryption with a hard-coded weak encryption key. The key for local FTP server passwords is hard-coded in the binary. CVE-2020-6852CACAGOO Cloud Storage Intelligent Camera TV-288ZD-2MP with firmware 3.4.2.0919 has weak authentication of TELNET access, leading to root privileges without any password required. CVE-2020-6824Initially, a user opens a Private Browsing Window and generates a password for a site, then closes the Private Browsing Window but leaves Firefox open. Subsequently, if the user had opened a new Private Browsing Window, revisited the same site, and generated a new password - the generated passwords would have been identical, rather than independent. This vulnerability affects Firefox < 75. CVE-2020-6794If a user saved passwords before Thunderbird 60 and then later set a master password, an unencrypted copy of these passwords is still accessible. This is because the older stored password file was not deleted when the data was copied to a new format starting in Thunderbird 60. The new master password is added only on the new file. This could allow the exposure of stored password data outside of user expectations. This vulnerability affects Thunderbird < 68.5. CVE-2020-6648A cleartext storage of sensitive information vulnerability in FortiOS command line interface in versions 6.2.4 and below may allow an authenticated attacker to obtain sensitive information such as users passwords by connecting to FortiGate CLI and executing the "diag sys ha checksum show" command. CVE-2020-6369SAP Solution Manager and SAP Focused Run (update provided in WILY_INTRO_ENTERPRISE 9.7, 10.1, 10.5, 10.7), allows an unauthenticated attackers to bypass the authentication if the default passwords for Admin and Guest have not been changed by the administrator.This may impact the confidentiality of the service. CVE-2020-6250SAP Adaptive Server Enterprise, version 16.0, allows an authenticated attacker to exploit certain misconfigured endpoints exposed over the adjacent network, to read system administrator password leading to Information Disclosure. This could help the attacker to read/write any data and even stop the server like an administrator. CVE-2020-6242SAP Business Objects Business Intelligence Platform (Live Data Connect), versions 1.0, 2.0, 2.1, 2.2, 2.3, allows an attacker to logon on the Central Management Console without password in case of the BIPRWS application server was not protected with some specific certificate, leading to Missing Authentication Check. CVE-2020-6239Under certain conditions SAP Business One (Backup service), versions 9.3, 10.0, allows an attacker with admin permissions to view SYSTEM user password in clear text, leading to Information Disclosure. CVE-2020-6224SAP NetWeaver AS Java (HTTP Service), versions 7.10, 7.11, 7.20, 7.30, 7.31, 7.40, 7.50, allows an attacker with administrator privileges to access user sensitive data such as passwords in trace files, when the user logs in and sends request with login credentials, leading to Information Disclosure. CVE-2020-6195SAP Business Objects Business Intelligence Platform (CMC), version 4.1, 4.2, shows cleartext password in the response, leading to Information Disclosure. It involves social engineering in order to gain access to system and If password is known, it would give administrative rights to the attacker to read/modify delete the data and rights within the system. CVE-2020-6186SAP Host Agent, version 7.21, allows an attacker to cause a slowdown in processing of username/password-based authentication requests of the SAP Host Agent, leading to Denial of Service. CVE-2020-6143A remote code execution vulnerability exists in the install functionality of OS4Ed openSIS 7.4. The password variable which is set at line 122 in install/Step5.php allows for injection of PHP code into the Data.php file that it writes. An attacker can send an HTTP request to trigger this vulnerability. CVE-2020-6140SQL injection vulnerability exists in the password reset functionality of OS4Ed openSIS 7.3. The password_stf_email parameter in the password reset page /opensis/ResetUserInfo.php is vulnerable to SQL injection. An attacker can send an HTTP request to trigger this vulnerability. CVE-2020-6139SQL injection vulnerability exists in the password reset functionality of OS4Ed openSIS 7.3. The username_stf_email parameter in the password reset page /opensis/ResetUserInfo.php is vulnerable to SQL injection. An attacker can send an HTTP request to trigger this vulnerability. CVE-2020-6138SQL injection vulnerability exists in the password reset functionality of OS4Ed openSIS 7.3. The uname parameter in the password reset page /opensis/ResetUserInfo.php is vulnerable to SQL injection An attacker can send an HTTP request to trigger this vulnerability. CVE-2020-6137SQL injection vulnerability exists in the password reset functionality of OS4Ed openSIS 7.3. The password_stf_email parameter in the password reset page /opensis/ResetUserInfo.php is vulnerable to SQL injection. An attacker can send an HTTP request to trigger this vulnerability. CVE-2020-5943In versions 14.1.0-14.1.0.1 and 14.1.2.5-14.1.2.7, when a BIG-IP object is created or listed through the REST interface, the protected fields are obfuscated in the REST response, not protected via a SecureVault cryptogram as TMSH does. One example of protected fields is the GTM monitor password. CVE-2020-5899In NGINX Controller 3.0.0-3.4.0, recovery code required to change a user's password is transmitted and stored in the database in plain text, which allows an attacker who can intercept the database connection or have read access to the database, to request a password reset using the email address of another registered user then retrieve the recovery code. CVE-2020-5841An issue was discovered in OpServices OpMon 9.3.1-1. Using password change parameters, an attacker could perform SQL injection without authentication. CVE-2020-5726The Grandstream UCM6200 series before 1.0.20.22 is vulnerable to an SQL injection via the CTI server on port 8888. A remote unauthenticated attacker can invoke the challenge action with a crafted username and discover user passwords. CVE-2020-5725The Grandstream UCM6200 series before 1.0.20.22 is vulnerable to an SQL injection via the HTTP server's websockify endpoint. A remote unauthenticated attacker can invoke the login action with a crafted username and, through the use of timing attacks, can discover user passwords. CVE-2020-5724The Grandstream UCM6200 series before 1.0.20.22 is vulnerable to an SQL injection via the HTTP server's websockify endpoint. A remote unauthenticated attacker can invoke the challenge action with a crafted username and discover user passwords. CVE-2020-5723The UCM6200 series 1.0.20.22 and below stores unencrypted user passwords in an SQLite database. This could allow an attacker to retrieve all passwords and possibly gain elevated privileges. CVE-2020-5722The HTTP interface of the Grandstream UCM6200 series is vulnerable to an unauthenticated remote SQL injection via crafted HTTP request. An attacker can use this vulnerability to execute shell commands as root on versions before 1.0.19.20 or inject HTML in password recovery emails in versions before 1.0.20.17. CVE-2020-5721MikroTik WinBox 3.22 and below stores the user's cleartext password in the settings.cfg.viw configuration file when the Keep Password field is set and no Master Password is set. Keep Password is set by default and, by default Master Password is not set. An attacker with access to the configuration file can extract a username and password to gain access to the router. CVE-2020-5569An unquoted search path vulnerability exists in HDD Password tool (for Windows) version 1.20.6620 and earlier which is stored in CANVIO PREMIUM 3TB(HD-MB30TY, HD-MA30TY, HD-MB30TS, HD-MA30TS), CANVIO PREMIUM 2TB(HD-MB20TY, HD-MA20TY, HD-MB20TS, HD-MA20TS), CANVIO PREMIUM 1TB(HD-MB10TY, HD-MA10TY, HD-MB10TS, HD-MA10TS), CANVIO SLIM 1TB(HD-SB10TK, HD-SB10TS), and CANVIO SLIM 500GB(HD-SB50GK, HD-SA50GK, HD-SB50GS, HD-SA50GS), and which was downloaded before 2020 May 10. Since it registers Windows services with unquoted file paths, when a registered path contains spaces, and a malicious executable is placed on a certain path, it may be executed with the privilege of the Windows service. CVE-2020-5422BOSH System Metrics Server releases prior to 0.1.0 exposed the UAA password as a flag to a process running on the BOSH director. It exposed the password to any user or process with access to the same VM (through ps or looking at process details). CVE-2020-5414VMware Tanzu Application Service for VMs (2.7.x versions prior to 2.7.19, 2.8.x versions prior to 2.8.13, and 2.9.x versions prior to 2.9.7) contains an App Autoscaler that logs the UAA admin password. This credential is redacted on VMware Tanzu Operations Manager; however, the unredacted logs are available to authenticated users of the BOSH Director. This credential would grant administrative privileges to a malicious user. The same versions of App Autoscaler also log the App Autoscaler Broker password. Prior to newer versions of Operations Manager, this credential was not redacted from logs. This credential allows a malicious user to create, delete, and modify App Autoscaler services instances. Operations Manager started redacting this credential from logs as of its versions 2.7.15, 2.8.6, and 2.9.1. Note that these logs are typically only visible to foundation administrators and operators. CVE-2020-5406VMware Tanzu Application Service for VMs, 2.6.x versions prior to 2.6.18, 2.7.x versions prior to 2.7.11, and 2.8.x versions prior to 2.8.5, includes a version of PCF Autoscaling that writes database connection properties to its log, including database username and password. A malicious user with access to those logs may gain unauthorized access to the database being used by Autoscaling. CVE-2020-5365Dell EMC Isilon versions 8.2.2 and earlier contain a remotesupport vulnerability. The pre-configured support account, remotesupport, is bundled in the Dell EMC Isilon OneFS installation. This account is used for diagnostics and other support functions. Although the default password is different for every cluster, it is predictable. CVE-2020-5363Select Dell Client Consumer and Commercial platforms include an issue that allows the BIOS Admin password to be changed through Dell's manageability interface without knowledge of the current BIOS Admin password. This could potentially allow an unauthorized actor, with physical access and/or OS administrator privileges to the device, to gain privileged access to the platform and the hard drive. CVE-2020-5350Dell EMC Integrated Data Protection Appliance versions 2.0, 2.1, 2.2, 2.3, 2.4 contain a command injection vulnerability in the ACM component. A remote authenticated malicious user with root privileges could inject parameters in the ACM component APIs that could lead to manipulation of passwords and execution of malicious commands on ACM component. CVE-2020-5326Affected Dell Client platforms contain a BIOS Setup configuration authentication bypass vulnerability in the pre-boot Intel Rapid Storage Response Technology (iRST) Manager menu. An attacker with physical access to the system could perform unauthorized changes to the BIOS Setup configuration settings without requiring the BIOS Admin password by selecting the Optimized Defaults option in the pre-boot iRST Manager. CVE-2020-5292Leantime before versions 2.0.15 and 2.1-beta3 has a SQL Injection vulnerability. The impact is high. Malicious users/attackers can execute arbitrary SQL queries negatively affecting the confidentiality, integrity, and availability of the site. Attackers can exfiltrate data like the users' and administrators' password hashes, modify data, or drop tables. The unescaped parameter is "searchUsers" when sending a POST request to "/tickets/showKanban" with a valid session. In the code, the parameter is named "users" in class.tickets.php. This issue is fixed in versions 2.0.15 and 2.1.0 beta 3. CVE-2020-5263auth0.js (NPM package auth0-js) greater than version 8.0.0 and before version 9.12.3 has a vulnerability. In the case of an (authentication) error, the error object returned by the library contains the original request of the user, which may include the plaintext password the user entered. If the error object is exposed or logged without modification, the application risks password exposure. This is fixed in version 9.12.3 CVE-2020-5260Affected versions of Git have a vulnerability whereby Git can be tricked into sending private credentials to a host controlled by an attacker. Git uses external "credential helper" programs to store and retrieve passwords or other credentials from secure storage provided by the operating system. Specially-crafted URLs that contain an encoded newline can inject unintended values into the credential helper protocol stream, causing the credential helper to retrieve the password for one server (e.g., good.example.com) for an HTTP request being made to another server (e.g., evil.example.com), resulting in credentials for the former being sent to the latter. There are no restrictions on the relationship between the two, meaning that an attacker can craft a URL that will present stored credentials for any host to a host of their choosing. The vulnerability can be triggered by feeding a malicious URL to git clone. However, the affected URLs look rather suspicious; the likely vector would be through systems which automatically clone URLs not visible to the user, such as Git submodules, or package systems built around Git. The problem has been patched in the versions published on April 14th, 2020, going back to v2.17.x. Anyone wishing to backport the change further can do so by applying commit 9a6bbee (the full release includes extra checks for git fsck, but that commit is sufficient to protect clients against the vulnerability). The patched versions are: 2.17.4, 2.18.3, 2.19.4, 2.20.3, 2.21.2, 2.22.3, 2.23.2, 2.24.2, 2.25.3, 2.26.1. CVE-2020-5248GLPI before before version 9.4.6 has a vulnerability involving a default encryption key. GLPIKEY is public and is used on every instance. This means anyone can decrypt sensitive data stored using this key. It is possible to change the key before installing GLPI. But on existing instances, data must be reencrypted with the new key. Problem is we can not know which columns or rows in the database are using that; espcially from plugins. Changing the key without updating data would lend in bad password sent from glpi; but storing them again from the UI will work. CVE-2020-5240In wagtail-2fa before 1.4.1, any user with access to the CMS can view and delete other users 2FA devices by going to the correct path. The user does not require special permissions in order to do so. By deleting the other users device they can disable the target users 2FA devices and potentially compromise the account if they figure out their password. The problem has been patched in version 1.4.1. CVE-2020-5229Opencast before 8.1 stores passwords using the rather outdated and cryptographically insecure MD5 hash algorithm. Furthermore, the hashes are salted using the username instead of a random salt, causing hashes for users with the same username and password to collide which is problematic especially for popular users like the default `admin` user. This essentially means that for an attacker, it might be feasible to reconstruct a user's password given access to these hashes. Note that attackers needing access to the hashes means that they must gain access to the database in which these are stored first to be able to start cracking the passwords. The problem is addressed in Opencast 8.1 which now uses the modern and much stronger bcrypt password hashing algorithm for storing passwords. Note, that old hashes remain MD5 until the password is updated. For a list of users whose password hashes are stored using MD5, take a look at the `/user-utils/users/md5.json` REST endpoint. CVE-2020-5222Opencast before 7.6 and 8.1 enables a remember-me cookie based on a hash created from the username, password, and an additional system key. This means that an attacker getting access to a remember-me token for one server can get access to all servers which allow log-in using the same credentials without ever needing the credentials. This problem is fixed in Opencast 7.6 and Opencast 8.1 CVE-2020-5179Comtech Stampede FX-1010 7.4.3 devices allow remote authenticated administrators to execute arbitrary OS commands by navigating to the Diagnostics Ping page and entering shell metacharacters in the Target IP address field. (In some cases, authentication can be achieved with the comtech password for the comtech account.) CVE-2020-4854IBM Spectrum Protect Plus 10.1.0 thorugh 10.1.6 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. IBM X-Force ID: 190454. CVE-2020-4622IBM Data Risk Manager (iDNA) 2.0.6 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. IBM X-Force ID: 184983. CVE-2020-4574IBM Tivoli Key Lifecycle Manager does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 184181. CVE-2020-4459IBM Security Verify Access 10.7 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. IBM X-Force ID: 181395. CVE-2020-4429IBM Data Risk Manager 2.0.1, 2.0.2, 2.0.3, 2.0.4, 2.0.5, and 2.0.6 contains a default password for an IDRM administrative account. A remote attacker could exploit this vulnerability to login and execute arbitrary code on the system with root privileges. IBM X-Force ID: 180534. CVE-2020-4408The IBM QRadar Advisor 1.1 through 2.5.2 with Watson App for IBM QRadar SIEM does not adequately mask all passwords during input, which could be obtained by a physical attacker nearby. IBM X-Force ID: 179536. CVE-2020-4385IBM Verify Gateway (IVG) 1.0.0 and 1.0.1 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. IBM X-Force ID: 179266. CVE-2020-4283IBM Security Information Queue (ISIQ) 1.0.0, 1.0.1, 1.0.2, 1.0.3, and 1.0.4 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. IBM X-Force ID: 176206. CVE-2020-4269IBM QRadar 7.3.0 to 7.3.3 Patch 2 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. IBM X-ForceID: 175845. CVE-2020-4245IBM Security Identity Governance and Intelligence 5.2.6 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 175423. CVE-2020-4216IBM Spectrum Protect Plus 10.1.0 through 10.1.5 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. IBM X-Force ID: 175066. CVE-2020-4208IBM Spectrum Protect Plus 10.1.0 through 10.1.5 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. IBM X-Force ID: 174975. CVE-2020-4190IBM Security Guardium 10.6, 11.0, and 11.1 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. IBM X-Force ID: 174851. CVE-2020-4177IBM Security Guardium 11.1 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. IBM X-Force ID: 174732. CVE-2020-4072In generator-jhipster-kotlin version 1.6.0 log entries are created for invalid password reset attempts. As the email is provided by a user and the api is public this can be used by an attacker to forge log entries. This is vulnerable to https://cwe.mitre.org/data/definitions/117.html This problem affects only application generated with jwt or session authentication. Applications using oauth are not vulnerable. This issue has been fixed in version 1.7.0. CVE-2020-4071In django-basic-auth-ip-whitelist before 0.3.4, a potential timing attack exists on websites where the basic authentication is used or configured, i.e. BASIC_AUTH_LOGIN and BASIC_AUTH_PASSWORD is set. Currently the string comparison between configured credentials and the ones provided by users is performed through a character-by-character string comparison. This enables a possibility that attacker may time the time it takes the server to validate different usernames and password, and use this knowledge to work out the valid credentials. This attack is understood not to be realistic over the Internet. However, it may be achieved from within local networks where the website is hosted, e.g. from inside a data centre where a website's server is located. Sites protected by IP address whitelisting only are unaffected by this vulnerability. This vulnerability has been fixed on version 0.3.4 of django-basic-auth-ip-whitelist. Update to version 0.3.4 as soon as possible and change basic authentication username and password configured on a Django project using this package. A workaround without upgrading to version 0.3.4 is to stop using basic authentication and use the IP whitelisting component only. It can be achieved by not setting BASIC_AUTH_LOGIN and BASIC_AUTH_PASSWORD in Django project settings. CVE-2020-4001The SD-WAN Orchestrator 3.3.2, 3.4.x, and 4.0.x has default passwords allowing for a Pass-the-Hash Attack. SD-WAN Orchestrator ships with default passwords for predefined accounts which may lead to to a Pass-the-Hash attack. CVE-2020-3935TAIWAN SECOM CO., LTD., a Door Access Control and Personnel Attendance Management system, stores users&#8217; information by cleartext in the cookie, which divulges password to attackers. CVE-2020-3928GeoVision Door Access Control device family is hardcoded with a root password, which adopting an identical password in all devices. CVE-2020-3923DVR firmware in TAT-76 and TAT-77 series of products, provided by TONNET, contain misconfigured authentication mechanism. Attackers can crack the default password and gain access to the system. CVE-2020-3841The issue was addressed with improved UI handling. This issue is fixed in iOS 13.3.1 and iPadOS 13.3.1, Safari 13.0.5. A local user may unknowingly send a password unencrypted over the network. CVE-2020-3602A vulnerability in the CLI of Cisco StarOS operating system for Cisco ASR 5000 Series Routers could allow an authenticated, local attacker to elevate privileges on an affected device. The vulnerability is due to insufficient input validation of CLI commands. An attacker could exploit this vulnerability by sending crafted commands to the CLI. A successful exploit could allow the attacker to execute arbitrary code with the privileges of the root user on the affected device. To exploit this vulnerability, an attacker would need to have valid credentials on an affected device and know the password for the cli test-commands command. CVE-2020-3547A vulnerability in the web-based management interface of Cisco AsyncOS software for Cisco Email Security Appliance (ESA), Cisco Content Security Management Appliance (SMA), and Cisco Web Security Appliance (WSA) could allow an authenticated, remote attacker to access sensitive information on an affected device. The vulnerability exists because an insecure method is used to mask certain passwords on the web-based management interface. An attacker could exploit this vulnerability by looking at the raw HTML code that is received from the interface. A successful exploit could allow the attacker to obtain some of the passwords configured throughout the interface. CVE-2020-3542A vulnerability in Cisco Webex Training could allow an authenticated, remote attacker to join a password-protected meeting without providing the meeting password. The vulnerability is due to improper validation of input to API requests that are a part of meeting join flow. An attacker could exploit this vulnerability by sending an API request to the application, which would return a URL that includes a meeting join page that is prepopulated with the meeting username and password. A successful exploit could allow the attacker to join the password-protected meeting. The attacker would be visible in the attendee list of the meeting. CVE-2020-3446A vulnerability in Cisco Virtual Wide Area Application Services (vWAAS) with Cisco Enterprise NFV Infrastructure Software (NFVIS)-bundled images for Cisco ENCS 5400-W Series and CSP 5000-W Series appliances could allow an unauthenticated, remote attacker to log into the NFVIS CLI of an affected device by using accounts that have a default, static password. The vulnerability exists because the affected software has user accounts with default, static passwords. An attacker with access to the NFVIS CLI of an affected device could exploit this vulnerability by logging into the CLI. A successful exploit could allow the attacker to access the NFVIS CLI with administrator privileges. CVE-2020-3419A vulnerability in Cisco Webex Meetings and Cisco Webex Meetings Server could allow an unauthenticated, remote attacker to join a Webex session without appearing on the participant list. This vulnerability is due to improper handling of authentication tokens by a vulnerable Webex site. An attacker could exploit this vulnerability by sending crafted requests to a vulnerable Cisco Webex Meetings or Cisco Webex Meetings Server site. A successful exploit requires the attacker to have access to join a Webex meeting, including applicable meeting join links and passwords. The attacker could then exploit this vulnerability to join meetings, without appearing in the participant list, while having full access to audio, video, chat, and screen sharing capabilities. CVE-2020-3394A vulnerability in the Enable Secret feature of Cisco Nexus 3000 Series Switches and Cisco Nexus 9000 Series Switches in standalone NX-OS mode could allow an authenticated, local attacker to issue the enable command and get full administrative privileges. To exploit this vulnerability, the attacker would need to have valid credentials for the affected device. The vulnerability is due to a logic error in the implementation of the enable command. An attacker could exploit this vulnerability by logging in to the device and issuing the enable command. A successful exploit could allow the attacker to gain full administrative privileges without using the enable password. Note: The Enable Secret feature is disabled by default. CVE-2020-3389A vulnerability in the installation component of Cisco Hyperflex HX-Series Software could allow an authenticated, local attacker to retrieve the password that was configured at installation on an affected device. The vulnerability exists because sensitive information is stored as clear text. An attacker could exploit this vulnerability by authenticating to an affected device and navigating to the directory that contains sensitive information. A successful exploit could allow the attacker to obtain sensitive information in clear text from the affected device. CVE-2020-3330A vulnerability in the Telnet service of Cisco Small Business RV110W Wireless-N VPN Firewall Routers could allow an unauthenticated, remote attacker to take full control of the device with a high-privileged account. The vulnerability exists because a system account has a default and static password. An attacker could exploit this vulnerability by using this default account to connect to the affected system. A successful exploit could allow the attacker to gain full control of an affected device. CVE-2020-3253A vulnerability in the support tunnel feature of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to access the shell of an affected device even though expert mode is disabled. The vulnerability is due to improper configuration of the support tunnel feature. An attacker could exploit this vulnerability by enabling the support tunnel, setting a key, and deriving the tunnel password. A successful exploit could allow the attacker to run any system command with root access on an affected device. CVE-2020-3180A vulnerability in Cisco SD-WAN Solution Software could allow an unauthenticated, local attacker to access an affected device by using an account that has a default, static password. This account has root privileges. The vulnerability exists because the affected software has a user account with a default, static password. An attacker could exploit this vulnerability by remotely connecting to an affected system by using this account. A successful exploit could allow the attacker to log in by using this account with root privileges. CVE-2020-3158A vulnerability in the High Availability (HA) service of Cisco Smart Software Manager On-Prem could allow an unauthenticated, remote attacker to access a sensitive part of the system with a high-privileged account. The vulnerability is due to a system account that has a default and static password and is not under the control of the system administrator. An attacker could exploit this vulnerability by using this default account to connect to the affected system. A successful exploit could allow the attacker to obtain read and write access to system data, including the configuration of an affected device. The attacker would gain access to a sensitive portion of the system, but the attacker would not have full administrative rights to control the device. CVE-2020-3142A vulnerability in Cisco Webex Meetings Suite sites and Cisco Webex Meetings Online sites could allow an unauthenticated, remote attendee to join a password-protected meeting without providing the meeting password. The connection attempt must initiate from a Webex mobile application for either iOS or Android. The vulnerability is due to unintended meeting information exposure in a specific meeting join flow for mobile applications. An unauthorized attendee could exploit this vulnerability by accessing a known meeting ID or meeting URL from the mobile device&rsquo;s web browser. The browser will then request to launch the device&rsquo;s Webex mobile application. A successful exploit could allow the unauthorized attendee to join the password-protected meeting. The unauthorized attendee will be visible in the attendee list of the meeting as a mobile attendee. Cisco has applied updates that address this vulnerability and no user action is required. This vulnerability affects Cisco Webex Meetings Suite sites and Cisco Webex Meetings Online sites releases earlier than 39.11.5 and 40.1.3. CVE-2020-3124A vulnerability in the web-based interface of Cisco Hosted Collaboration Mediation Fulfillment (HCM-F) could allow an unauthenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack on an affected system. The vulnerability is due to insufficient CSRF protections by the affected software. An attacker could exploit this vulnerability by persuading a targeted user to click a malicious link. A successful exploit could allow the attacker to send arbitrary requests that could change the password of a targeted user. An attacker could then take unauthorized actions on behalf of the targeted user. CVE-2020-29063An issue was discovered on CDATA 72408A, 9008A, 9016A, 92408A, 92416A, 9288, 97016, 97024P, 97028P, 97042P, 97084P, 97168P, FD1002S, FD1104, FD1104B, FD1104S, FD1104SN, FD1108S, FD1204S-R2, FD1204SN, FD1204SN-R2, FD1208S-R2, FD1216S-R1, FD1608GS, FD1608SN, FD1616GS, FD1616SN, and FD8000 devices. A custom encryption algorithm is used to store encrypted passwords. This algorithm will XOR the password with the hardcoded *j7a(L#yZ98sSd5HfSgGjMj8;Ss;d)(*&^#@$a2s0i3g value. CVE-2020-29062An issue was discovered on CDATA 72408A, 9008A, 9016A, 92408A, 92416A, 9288, 97016, 97024P, 97028P, 97042P, 97084P, 97168P, FD1002S, FD1104, FD1104B, FD1104S, FD1104SN, FD1108S, FD1204S-R2, FD1204SN, FD1204SN-R2, FD1208S-R2, FD1216S-R1, FD1608GS, FD1608SN, FD1616GS, FD1616SN, and FD8000 devices. There is a default blank password for the guest account. CVE-2020-29061An issue was discovered on CDATA 72408A, 9008A, 9016A, 92408A, 92416A, 9288, 97016, 97024P, 97028P, 97042P, 97084P, 97168P, FD1002S, FD1104, FD1104B, FD1104S, FD1104SN, FD1108S, FD1204S-R2, FD1204SN, FD1204SN-R2, FD1208S-R2, FD1216S-R1, FD1608GS, FD1608SN, FD1616GS, FD1616SN, and FD8000 devices. There is a default root126 password for the root account. CVE-2020-29060An issue was discovered on CDATA 72408A, 9008A, 9016A, 92408A, 92416A, 9288, 97016, 97024P, 97028P, 97042P, 97084P, 97168P, FD1002S, FD1104, FD1104B, FD1104S, FD1104SN, FD1108S, FD1204S-R2, FD1204SN, FD1204SN-R2, FD1208S-R2, FD1216S-R1, FD1608GS, FD1608SN, FD1616GS, FD1616SN, and FD8000 devices. There is a default debug124 password for the debug account. CVE-2020-29059An issue was discovered on CDATA 72408A, 9008A, 9016A, 92408A, 92416A, 9288, 97016, 97024P, 97028P, 97042P, 97084P, 97168P, FD1002S, FD1104, FD1104B, FD1104S, FD1104SN, FD1108S, FD1204S-R2, FD1204SN, FD1204SN-R2, FD1208S-R2, FD1216S-R1, FD1608GS, FD1608SN, FD1616GS, FD1616SN, and FD8000 devices. There is a default panger123 password for the suma123 account for certain old firmware. CVE-2020-29055An issue was discovered on CDATA 72408A, 9008A, 9016A, 92408A, 92416A, 9288, 97016, 97024P, 97028P, 97042P, 97084P, 97168P, FD1002S, FD1104, FD1104B, FD1104S, FD1104SN, FD1108S, FD1204S-R2, FD1204SN, FD1204SN-R2, FD1208S-R2, FD1216S-R1, FD1608GS, FD1608SN, FD1616GS, FD1616SN, and FD8000 devices. By default, the appliance can be managed remotely only with HTTP, telnet, and SNMP. It doesn't support SSL/TLS for HTTP or SSH. An attacker can intercept passwords sent in cleartext and conduct man-in-the-middle attacks on the management of the appliance. CVE-2020-28924An issue was discovered in Rclone before 1.53.3. Due to the use of a weak random number generator, the password generator has been producing weak passwords with much less entropy than advertised. The suggested passwords depend deterministically on the time the second rclone was started. This limits the entropy of the passwords enormously. These passwords are often used in the crypt backend for encryption of data. It would be possible to make a dictionary of all possible passwords with about 38 million entries per password length. This would make decryption of secret material possible with a plausible amount of effort. NOTE: all passwords generated by affected versions should be changed. CVE-2020-28917An issue was discovered in the view_statistics (aka View frontend statistics) extension before 2.0.1 for TYPO3. It saves all GET and POST data of TYPO3 frontend requests to the database. Depending on the extensions used on a TYPO3 website, sensitive data (e.g., cleartext passwords if ext:felogin is installed) may be saved. CVE-2020-28642In InfiniteWP Admin Panel before 3.1.12.3, resetPasswordSendMail generates a weak password-reset code, which makes it easier for remote attackers to conduct admin Account Takeover attacks. CVE-2020-28638ask_password in Tomb 2.0 through 2.7 returns a warning when pinentry-curses is used and $DISPLAY is non-empty, causing affected users' files to be encrypted with "tomb {W] Detected DISPLAY, but only pinentry-curses is found." as the encryption key. CVE-2020-28334Barco wePresent WiPG-1600W devices use Hard-coded Credentials (issue 2 of 2). Affected Version(s): 2.5.1.8, 2.5.0.25, 2.5.0.24, 2.4.1.19. The Barco wePresent WiPG-1600W device has a hardcoded root password hash included in the firmware image. Exploiting CVE-2020-28329, CVE-2020-28330 and CVE-2020-28331 could potentially be used in a simple and automated exploit chain to go from unauthenticated remote attacker to root shell. CVE-2020-28330Barco wePresent WiPG-1600W devices have Unprotected Transport of Credentials. Affected Version(s): 2.5.1.8. An attacker armed with hardcoded API credentials (retrieved by exploiting CVE-2020-28329) can issue an authenticated query to display the admin password for the main web user interface listening on port 443/tcp of a Barco wePresent WiPG-1600W device. CVE-2020-28329Barco wePresent WiPG-1600W firmware includes a hardcoded API account and password that is discoverable by inspecting the firmware image. A malicious actor could use this password to access authenticated, administrative functions in the API. Affected Version(s): 2.5.1.8, 2.5.0.25, 2.5.0.24, 2.4.1.19. CVE-2020-28183SQL injection vulnerability in SourceCodester Water Billing System 1.0 via the username and password parameters to process.php. CVE-2020-27885Cross-Site Scripting (XSS) vulnerability on WSO2 API Manager 3.1.0. By exploiting a Cross-site scripting vulnerability the attacker can hijack a logged-in user&#8217;s session by stealing cookies which means that a malicious hacker can change the logged-in user&#8217;s password and invalidate the session of the victim while the hacker maintains access. CVE-2020-27747An issue was discovered in Click Studios Passwordstate 8.9 (Build 8973).If the user of the system has assigned himself a PIN code for entering from a mobile device using the built-in generator (4 digits), a remote attacker has the opportunity to conduct a brute force attack on this PIN code. As result, remote attacker retrieves all passwords from another systems, available for affected account. CVE-2020-27693Trend Micro InterScan Messaging Security Virtual Appliance (IMSVA) 9.1 stores administrative passwords using a hash that is considered outdated. CVE-2020-27688RVToolsPasswordEncryption.exe in RVTools 4.0.6 allows users to encrypt passwords to be used in the configuration files. This encryption used a static IV and key, and thus using the Decrypt() method from VISKD.cs from the RVTools.exe executable allows for decrypting the encrypted passwords. The accounts used in the configuration files have access to vSphere instances. CVE-2020-27613The installation procedure in BigBlueButton before 2.2.17 uses ClueCon as the FreeSWITCH password, which allows local users to achieve unintended FreeSWITCH access. CVE-2020-27557